Support: (+91) 8129-790-790
img

  • Types of Crops: Any Fodder Crops & Paddy Stubbles
  • Number of Discs:  4
  • Cutting Width Cm.:  170
  • Transmission With Gears:  Yes
  • Wear-resistant Steel Skides:  Yes
  • Hydraulic Lift of The Cutter Bar:  Yes
  • Moving Angle: High 35 deg. Low 35 deg.
  • PTO Power (hp):   35 Hp or Above
  • Weight Kg.:  300

Disc Mover 404

The 404 is the smallest and most dynamic of the BCS disc mover. Designed to be used on low powered tractor is identified by extreme lightness and quick adaptability to the means to which it is entrusted. The single frame is compact and has been designed with a third special point incorporated, the whole permitting the machine's hydraulic lifting, supplied as standard, allows the operator to direct the cutting bar while staying comfortable seated on the tractor. A single effect distributor in needed to operate it. Bar excursion is 900 upward and 350 downwards. A spring linkage regulates the round pressure of the cutting bar. The four disc of the 404 are supported by eight small helical cutting blades. Two cones located on the first and last disc act as conveyor of the forage facilittation formation of the pathway.

  • Tractor PTO Operated:  Easily operated by tractor PTO (35 hp or above)
  • Sharp Cutting :  With 4 Discs with 8 Helical Cutting Blades
  • Two Cones Conveyers:  Works to make pathway for cutting fodder crops.
  • Hydraulic Lifting:  To lift the cutting bar during transportation & turning in field.
  • Beam Balancing Springs:  To balance the machine during the cutting operation
  • Special wear - proof slides :  To protect the housing of cutting bar and discs at the time of operations